Watmov

Waste Water & Storm Water

Waste Water & Storm Water

Watmov Engineering Pvt. Ltd is a technology-driven consultancy with a strong presence across the globe in the field of Waste Water and Storm Water with exceptional service in Sewage treatment plant consulting in India. Watmov™ designed total 150+ MLD Sewerage Treatment Plant.

Sanitary engineering starts at the point where water supply engineering ends. Sanitary engineering starts with the collecting system and ends after the streams or other bodies of receiving water have been returned to the condition of relative purity desired for them.

-Collection works

-Treatment works

-Disposal works

To remove various contaminants present in sewage so as to produce an effluent and sludge which can be disposed off in the environment without causing health hazards or nuisance. The contaminants in the domestic sewage are present in the form of Suspended (settleable, Non-settleable );Colloidal and Dissolved solids.

The objective of the treatment process involving various

(i) Operations/processes or

(ii) Combination of operations and processes ; by which the contaminants are stabilized and removed.

Methodology

  • Project Estimation And Design Specification Writing
  • General arrangement drawing Of Treatment Plants
  • Sewerage Collection from Domestic connection
  • Pipelined Network Design
  • Inspection Chamber and Manhole
  • Sewage Pumping
  • Complete Engineering And Design Of Wastewater Treatment Systems
  • Hydraulics Design using Advanced Software’s.
  • Sewage Treatment Plant

  – Aerobic

  – Anaerobic

  • Storage
  • Distribution

Aerobic Treatment -Treatment process for raw wastewater or further polishing of pretreated wastewater

Aerobic treatment is a biological wastewater treatment process that takes place in the presence of oxygen. Aerobic biomass converts organics in the wastewater into carbon dioxide and new biomass.

Evoqua offers aerobic treatment systems for both municipal and industrial facilities looking to treat raw wastewater and/or polish anaerobically pretreated wastewater. Ultimately, further reducing biochemical oxygen demand (BOD),
total suspended solids (TSS), nitrogen, and phosphorus. Aerobic treatment systems can also be used specifically to
remove nitrogen and phosphorus in the process known as biological nutrient removal (BNR).

Anaerobic Treatment – Energy Efficient solutions for treating wastewater prior to discharge or further polishing

Anaerobic digestion is a biological process in which organic wastes are broken down by microorganisms in the absence of oxygen. An anaerobic system can be used for pretreatment prior to discharging to a municipal wastewater treatment plant or before polishing in an aerobic process.

Anaerobic treatment is typically utilized to treat warm, high-strength industrial wastewater containing high concentrations of biodegradable organic matter. This energy-efficient process reliably removes biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total suspended solids (TSS) from wastewater.

How Sewage Treatment Plant STP Work?

A sewage treatment plant STP cleans wastewater by converting it into cleaner water. The wastewater is filtered through a series of pipes with discs attached. These disks have small holes that allow air to enter the chamber and move the sewage from top to bottom. During the first stage of the process, the sewage passes through an aeration basin. The oxygen in the wastewater causes the bacteria in the sediments to digest organic matter and produce clean water. Secondary treatment removes the remaining sediment and pollutants and makes it safe for direct discharge to a watercourse or a sewer.

Once the wastewater has passed through the aeration basins, it flows into the final compartments of the STP. The final phase is called the activated sludge process. This process breaks down the solids in the wastewater, which is then discharged back into the environment. This process is called a multi-stage system, as it treats the wastewater from many properties simultaneously. Once the sewage is treated, it will be
released into the environment.

The sewage flows into a primary clarifier. Here, the organic solids settle to the bottom and are referred to as primary sludge. This blanket is pumped into the aeration basins. Next, the sludge will undergo a second stage, called the activated sludge process, which will break down the sludge into smaller particles. The sludge will eventually reach the surface and be discharged into the environment.

 

Services We Offered

Pre Bid Engineering

  • Identification of Tenders
  • Preliminary Concept
  • Review of Tender Documents
  • Review of Designs
  • Review of RFQ/RFP Documents
  • Analyze of Technical Specifications
  • Site Investigations (Source)
  • Hydraulic Design Calculations
  • GAD’s
  • Preliminary Estimates
  • Pre bid meetings
  • Preparation of Preliminary
    Design Report
  • Bill of Quantities (BOQ)
  • Tender Submissions as per RFP

Detailed Engineering

  • Survey & Investigations
  • Marking on fields
  • Elevations & Contours
    Mapping
  • Drawings as per CPHEEO
  • Design of Raw Sewage pump house
  • Treatment Plant Transmission pumping facilities
  • Sewer network System and ancillaries structures
  • SBSFS
  • Pumping stations
  • Sludge Tanks

Products Handled

  • Packaged STP Automated
  • Packaged STP Semiautomated
  • Packaged STP Containerized
  • Packaged STP RBC
  • Packaged STP Submerged
  • MBBR Based STP CIVIL
  • Extended Aeration Based STP CIVIL
  • SBR Based STP CIVIL

Key Waste Water Projects

  • Thane STP – 4 phases (Total 100 MLD; 1050km Pipe) – Maharashtra
  • Maheshtala STP – 35MLD; 15km Pipe – West Bengal
  • Chandrapur STP – 25MLD; 12km Pipe – West Bengal

Other Services

  • Pipe Stress Analysis

    Reliable Pipe Stress Analysis for Your Project Ensure the safety and integrity of your piping systems with our expert analysis services Unparalleled Expertise in Pipe Stress Analysis Our team of

  • Water Supply

    Water Supply   Water Supply engineering involves supplying drinking water to consumes with good quality as well as optional desired quantity. Watmov is one of the biggest design engineering company

ALONE WE ARE SMART, TOGETHER WE ARE BRILLIANT

Join Us
Company Presentation
  • svg Company Brochure
  • svg Download .ZIP
  • svg Download .DOC